Static and dynamic dust test

Description

Static and dynamic dust test
To check the resistance of the product to the destructive (abrasive) effects of dust, as well as to check the dust-tightness of the product and its performance under environmental conditions with a high concentration of dust (sand), a dust chamber is used.

Dust chambers operate in several modes - static and dynamic, continuous and cyclic. Testing of products under the influence of static dust is carried out to check the ability of products to work in an environment with a high concentration of dust, and the impact of dynamic dust - lead to test the resistance of products to the destructive (abrasive) effects of dust.

Equipment:
KP-2,0.00039 dust chamber
The internal volume is 2.0 m3.
The size of the working volume of 1200 * 1800 * 1600 mm.
External dimensions are 5000 * 2100 * 3200 mm.
Dust circulation rate from 0.5 to 15 m / s.
Dust concentration from 2 to 8.8 g / m3.
Load to the bottom of the chamber 120 kg.
Temperature range of working volume - from ambient temperature to +55 ° C.
Relative humidity not more than 30%.
There is the possibility of applying the load to the tested products, as well as the possibility of changing the electrical parameters of the tested products.