Description
Climatic tests will allow to check the performance of your product under the influence of climatic factors. Changes in temperature, humidity, dust, precipitation can not affect the quality of lighting products. Our company has all the necessary equipment and professional competencies to conduct these tests in accordance with the requirements of state standards.
Equipment:
Cold and heat chamber КХТ-3,5
Climatic chamber KTK-800
Thermoelectric Chamber KHTB-0,4
Chamber of heat and moisture KTV-2.0
Camera rain KD-2.0
KP-2.0 dust chamber
Q-SUN Xe-3-HS Weatherometer
Types of climatic tests
High and low temperature test
Test climatic chambers are designed to artificially create various climatic conditions as close as possible to the operating conditions of the tested products.
Testing for climatic influences is carried out to verify the ability of products to perform their functions, maintain parameters and appearance within the established norms during exposure and after exposure to the minimum and maximum allowable values of the influencing factors.
Climatic tests include: assessment of the effects of positive and negative temperatures, cyclically varying temperatures (thermal cycling), sudden changes in temperature (thermal shock), splashing water, ultraviolet radiation, as well as these and other factors in the complex.
Equipment:
Camera cold and heat KXT-3,5. Designed to test products for the effects of low and high ambient temperatures in the chamber, both without electrical load and under electrical load; kamera_holoda_i_tepla_KHT_3_5
A control system based on a microprocessor controller-metering unit. Internal volume is 3,5 m3; inner dimensions are 1200 * 1800 * 1600 mm; temperature range from -70 ° C to + 100 ° C; temperature deviation not more than ± 2 ° C;
KXT 800 Climax-Thermocamera is a test chamber in which objects in the temperature range from -70 ° C to + 90 ° C and in relative humidity from 10% to 100% in the temperature range from + 10 ° C to + 60 ° can be tested. C. The setpoints set in the specified temperature and air conditioning range at any time can be kept constant in the useful space with high accuracy.
Test for exposure to elevated ambient temperature and reduced pressure
The tests are carried out with the aim of checking the parameters of the products for exposure to high and low temperature and low pressure.
Equipment:
Thermoelectric chamber KHTB-0,4. Internal volume not less than 0.4 m3; internaltermobarokamera_KHTB_0_4 dimensions not less than 790 * 1187 * 1180 mm; automatic maintenance of modes in the temperature ranges of at least from -70 ° C to + 155 ° C, a reduced atmospheric pressure of at least 799 * 10 ^ 2 to 133 Pa (from 600 to 1 mm Hg);
Irregularity of pressure in the ranges of not more than:
799 * 10 ^ 2 to 133 Pa (from 600 to 100 mm of mercury.) - ± 5%;
133 * 10 ^ 2 to 133 Pa (from 100 to 1 mm Hg. Art.) - ± 1 mm Hg. v .;
A laptop with a set of special cables to communicate with the camera.
Moisture Testing
Tests for resistance to moisture are designed to determine the ability of products to maintain their performance and their parameters in conditions of prolonged exposure to moisture and after cessation of this exposure.
Equipment:
Camera heat and moisture KTV-2.0. Useful volume is not less than 2.0 m3; 00036 internal dimensions of the chamber are not less than 900 * 2000 * 1200 mm. Automatic maintenance in temperature ranges from at least + 10 ° C to + 110 ° C. The time to reach the upper limit of the range of reproducible temperatures from + 20 ° C to + 110 ° C for at least 60 minutes. The error in reproducing the setpoint temperature Δt3y (deviation of the steady-state temperature from the setpoint) is ± 1.0 ° C. The range of reproducible relative humidity in the temperature range from + 10 ° C to + 60 ° C is not less than 30% to 98%.
Testing products for the effects of atmospheric precipitation
Tests are designed to confirm the correctness of the chosen protection and to determine the possibility of functioning under the conditions of the impact of precipitation (the effects of sprays, jets, rain or to stay in water).
Equipment:
kamera_dozhdya_KD_2_0Camera KD-2.0 rain chamber. The internal volume of the chamber is 2.0 m3. The camera has an object table for the installation of products. Manual and automatic control. When testing provided the ability to apply an electrical voltage of 220V, 50Hz and loads up to 5A to the test product. The mass of the tested product is up to 50kg. The camera is made with an additional capacity for testing for water resistance. Included with the camera comes a water treatment system that allows you to set and maintain the temperature of the "rain in the chamber."
Test of materials for light and weather resistance
Tests allow you to understand how the product behaves in the open air.
Equipment:
Weather gauge Q-Sun Xe-3-HS. Full-size model with a wetting system,irrigation, control of relative humidity for testing for light resistance and weather resistance. The kit includes: vezerometr_Q_SUN Xe_3_HS
Weatherometer Xe-3-HS;
Spray irrigation system;
Humidity Control System RH Control;
Power Monitoring System SolarEye;
AutoCal Auto Calibration System;
Air cooling system for lamps;
1800 W xenon lamps;
Radiometer for calibration of lamps CR20 / 340 nm (type D);
Daylight-Q Optical Filter Kit;
BP temperature sensor (Black Panel);
Calibration thermometer ST-202 / ВР;
Water purification system to analytical quality.
