Description
|
Determination of oxidation induction time |
DSC 214 Polyma® Differential Scanning Calorimeter |
|
Determination of bending temperature under load (GOST 12021) |
HV-2000A6 - Vicat and HDT bending and softening temperature determination with a cooling compressor |
|
Determination of the temperature of the beginning of thermal decomposition |
TG 209 F1 Iris ® Thermomicrobits |
|
Softening point determination |
DMA 242 C / 1 / G Dynamic Mechanical Analysis Device |
|
Determination of the softening point ofadhesives and bituminous compositions according to the “Ring and Ball” method |
Tester "Ring and Ball" |
|
Determination of the softening temperature of thermoplastics by Vic (GOST 15088) |
HV-2000A6 - Vicat and HDT bending and softening temperature determination with a cooling compressor |
|
Melting point determination |
DSC 214 Polyma® Differential Scanning Calorimeter |
|
Determination of shrinkage |
DMA 242 C / 1 / G Dynamic Mechanical Analysis Device |
|
Determination of the thermal effects of chemical reactions |
DSC 214 Polyma® Differential Scanning Calorimeter |
|
Determination of moisture content |
TG 209 F1 Iris ® Thermomicrobits |
|
Determination of linear expansion coefficient |
DMA 242 C / 1 / G Dynamic Mechanical Analysis Device |
|
Determination of the modulus of elasticity on temperature |
DMA 242 C / 1 / G Dynamic Mechanical Analysis Device |
|
Determination of the modulus of elasticity of the load frequency |
DMA 242 C / 1 / G Dynamic Mechanical Analysis Device |
|
Determination of ash in an inert atmosphere |
TG 209 F1 Iris ® Thermomicrobits |
|
Determination of ash in air |
GMF-A Muffle Furnace |
|
Determination of heat resistance under load (ISO 75) |
HV-2000A6 - Vicat and HDT bending and softening temperature determination with a cooling compressor |
|
Determination of the amount of volatile components |
TG 209 F1 Iris ® Thermomicrobits |
|
Deformation heat resistance under load (ASTM D648) |
HV-2000A6 - Vicat and HDT bending and softening temperature determination with a cooling compressor |
|
Determination of the angle of mechanical loss |
DMA 242 C / 1 / G Dynamic Mechanical Analysis Device |
|
Determination of crystallization temperature |
DSC 214 Polyma® Differential Scanning Calorimeter |
