Prototyping of electronic devices, installation of prototypes / serial products

  • Rating:
  • (0 / 5)
Quick order
3D printing ABS / PLA (layer ≤0.25 mm), rub. / Cu. cm.
3D printing ABS / PLA (layer 0,2 mm), rub. / Cu. cm
3D printing ABS / PLA (0.15 mm layer), rub./cube cm
3D printing ABS / PLA (layer ≥0.1 mm), rub. / Cu. cm
3D printing of MJM (25 mrm layer), rub. / Cu. cm
DMLS-technology of 3d printing from powdered metals, rub. / Cu. cm
Milling of light metals with a thickness of 1-2 mm, rub. / Rm.
Milling of light metals with a thickness of 3-4 mm, rub. / Rm.
Textolite milling with a thickness of 1-2 mm, rub. / Rm.
PCB milling with a thickness of 3-4 mm, rub. / Rm.
Milling of polymers with a thickness of 1-4 mm, rub. / Rm.
Milling of polymers with a thickness of 5-10 mm, rub. / Rm.
Production of 3D casting / layering, rub / man-hour
Milling of light metals with a thickness of> 4 mm, rub. / Rm.
PCB milling with a thickness of> 4 mm, rub. / Rm.
Milling of polymers, except PVC, with a thickness of> 4 mm, rub. / Rm.
PVC milling, thickness> 4 mm, rub. / Rm.
Manual soldering of a pin output with a diameter up to 1 mm of an element on a printed circuit board, rub.
Manual soldering of the pin output with a diameter of 1 to 5 mm of an element on a printed circuit board, rub.
Manual soldering of SMD component output to one- and two-sided printed circuit board, rub.
Manual soldering of the BGA component output to a single- and double-sided printed circuit board, rub.
Automatic soldering of SMD component output to one- and two-sided printed circuit board, rub.
Automatic soldering of a pin output with a diameter up to 1 mm of an element on a printed circuit board, rub.
Washing of printed circuit boards from flux residues, rub./sq.dm.
Additional services for the installation of printed circuit boards of complex shape and flex-rigid printed circuit boards, rub./sq.m.
Moisture protection PCB varnish, rub. / Square dm.
Moisture protection of the PCB compound, rub./sq.dm.
Setup and testing of the developed power supply systems, rubles / man-hour
Setup and testing of developed systems for generating low-frequency signals, rub / man-hour
Tuning and testing of the developed systems for generating high-frequency signals up to 10 MHz, rub / man-hour
Installation of a conductor with a diameter up to 1 mm on a printed circuit board, rub.
Installation of a conductor with a diameter up to 1 mm on a pin output / lamella / connector, rub.
Installation of a conductor with a diameter of 1 to 8 mm, rub.
Installation of ribbon cable with the number of contacts up to 10, rub.
Installation of ribbon cable with the number of contacts from 10 to 30, rub.
Installation of the DIP-connector on the PCB, rub.
Installation of SMD-connector on the PCB, rub.
Testing the algorithms of the developed microprocessor systems for compliance with the technical task of the customer, rubles / man-hour
Assembly of a prototype / serial product, rubles / man-hour

No comments yet
Please rate it

R&D outsouring

We specialize in research outsourcing and development outsourcing, using the best equipment and experts

我们专注于研究外包和开发外包,使用最好的设备和专家

نحن متخصصون في الاستعانة بمصادر خارجية للبحوث وتطوير الاستعانة بمصادر خارجية ، باستخدام أفضل المعدات والخبراء

Nos especializamos en la investigación de outsourcing y desarrollo de outsourcing, utilizando los mejores equipos y expertos.

Contacts

New York

+1 800 322 3434

info@rndoutsourcing.com

Follow us
New York +1 800 322 3434